• 5 Wet-offset printing towers
• Web width 485 mm.
• Printing width 475 mm.
• Paper weight 40 to 200 g/m.
• Mechanical speed 250 m/min.
• Year of construction: 1991 / installation 1992
• State: ´´as it is´´ very good condition.

Specification:
• 1 x Paper unwind, max. paper unwind diameter 1270 mm.(50’’)
• 1 x Paper unwind shaft for core diameter ø 70 mm.
• 1 x Web edge control unit
• 1 x Web tension control unit (Infeed)
• 5 x Printing tower – wet-offset variable 14’’- 26’’.
• 5 x Printing inserts – wet-offset – 24”. Plate 0, 3 mm, adhesive blanket 1, 04 mm.
• 4 x Printing inserts – wet-offset – 22”. Plate 0, 3 mm, adhesive blanket 1, 04 mm.
• 2 x Printing inserts – wet-offset – 17”. Plate 0, 3 mm, adhesive blanket 1, 04 mm.
• 1 x turn bar for printing back side 1-4 or 2-3
• 1 x Technotrans refrigerated dampening control unit.
• 1 x Processing unit with following features:
1 x pulling cylinder
1 x combined slitting-perforation- and web tension group
1 x set of pull + holders with pull wheels.
1 x set perforation wheel holders with perforation wheels
2 x drive positions (empty) for file hole units.
1 x 32’’ anvil cylinder.
• 1 x IMR sprocket punch unit, with four lines NG sprocket punching.
• 1 x Cross perforation cylinder 24” and 22’’.
• 1 x Zig-zag folder with folding gears 7⅓ ´´, 8”, 8½´´, 11´´ and 12”
• 1 x Delivery table.
• 1 x Drent 9 S scissor cut sheeter sideways movable. A4, A3, 24”. Sheeter is sideways movable.
• 1 x Automation R50 economy stacker.
• 1 x Set of anti vibration blocks for installation of the press
• 1 x Tool box
• 1 x Set of original schematics and documentation
• 1 x Instruction book and parts manual.